GOOD BLACK HORSE DIAMOND TOOL CO.,LTD
| Description | Type | Size | |
|---|---|---|---|
| Sintered Diamond Drills With 1/2 GAS Sintered Diamond Drills With 1/2 GAS |
JPG | 5,043 byte | show |
| Diamond Core Drills A tubular steel cylinder with platend and metal bonded diamond on the saw teeth. Cut holes in rock slabs, glass or ceramics. Use at low speed in a drill press with a pecking motion and flood workpiece with Dia-Cut or Kool Kut for maximum life. Inside diameter is 0.08" less than the outside diameter. For the best results use at the RPM specified in the table below and remove the internal core after each drilling operation. Diameter from 4mm upto 200mm. |
JPG | 9,079 byte | show |
| Flate Polishing Machine Volume :730*730*820MM power:0.75KW Rotation speed:1400RPM -2800RPM Applied equipment :Diamond grinding plate , resin grinding plate , felt pad , polyurathan pad. Speciality :with timing motor Function:for small glass , mirror edge & arris grinding & polishing by hand |
JPG | 9,310 byte | show |
| Diamond Belts Electroplated and Resin Diamond belts Greatly speeds up production, increase productivity, provide a more consistent finish, reduce glass damage and overall costs. Their life expectancy far exceeds conventional SiC linishing belts. Diamond belts are designed to replace conventional abrasives for grinding and polishing glass. They will grind all glass types except toughened glass and can also be used on most ceramics. The available range of grits matches the type of work, and the belts come in sizes that fit all popular linishing machines. Custom sizes are also available. Resin Belts:These resin treated belts are designed to be used with a diamond compound for smoothing and polishing gemstones. A flush seam allows the belt to be run in either direction |
JPG | 5,179 byte | show |
| Diamond Sheet.jpg | JPG | 6,264 byte | show |
| Diamond Resin Glass Wheels | JPG | 32,976 byte | show |
| Clear Pencil Bevel Glass Clear Pencil Bevel Glass |
JPG | 2,162 byte | show |
| Electroplated Diamond Disk Suitable for hard surfaces such as glass, fibreglass, ceramics, marble, granite, limestone, sandstone, composites, and some plastics. They are particularly well suited for glass bevelling, cold glass working and lapidary. Can provide a big savings over conventionally-plated solid discs. The diamonds are nickel bonded (using a special patented process) to a thin flexible fiberglass substrate. The fiberglass is coated with a pressure sensitive adhesive which makes installation very easy. When the pad becomes worn, just peel it off and apply a new one. Install the pad on a balanced steel or aluminium disc, or on the bottom side of an existing plated disc. Diamond Disk using any diamond mesh/grit size from as fine as few microns to as course as 40 grit can be made as well. Available with or without Dot ,Grooves (lines). Diameter from 6´ to 40´ |
JPG | 5,247 byte | show |
| Diamond Bandsaw Band-Saw (DL750) General Description This machine is a micro miniature diamond band-saw which is specially designed by our company. It is a lightweight, practical, easy to operate machine that possessing the cutting performance of more expensive units. It can cut the various small-sized slab materials of stained glass, ceramics, colored stone and jade stone etc., into virtually any shape. It is a most practical machine for special technical manufacturing and art decoration. Technical Details MODEL DL 750 CUTTING ABILITY WIDTH 125mm. THICKNESS 6mm LINEAR VELOCITY 180mm/min OPENING WIDTH 0.8mm WORK TABLE DIMENSIONS 250 x 230mm POWER SOURCE,VOLTAGE 220V POWER 115W NET WEIGHT 3.8kg |
JPG | 7,251 byte | show |
| Diamond Profile Wheels Categories: CNC TOOLS Item No: GBH0086 Item name: Profile Wheel Description: V20. V30. V40. V60. V80 |
JPG | 7,059 byte | show |
| Diamond Grinding Wheels Diamond Grinding wheels for polishing and grinding glass |
JPG | 28,482 byte | show |
| Diamond Finger Bits | JPG | 8,760 byte | show |
| Diamond hand pads Are created using the same high quality material that we use to make our Diamond disks. The diamond material is attached to a firm foam sponge backing block that fits comfortably into your hand. The diamond surface covers one face of the sponge which measures: 4 1/4 x 2 1/4 x 1 1/4 inches;85mmx55mmx30mm. Use these pads for larger pieces that are too difficult to get on the grinder, or use them for a quick clean up of slumped or cast pieces. Sponge backed, Diamond Hand Sanding Pads polish better and last longer than emery paper. They also work well on Alabaster, a must when sanding hard stone such as onyx or marble. |
JPG | 6,640 byte | show |
| concave curved facets.jpg | JPG | 9,253 byte | show |
