We have been reflecting on the last two years since SmartMelter® became available to the glass industry two years ago. Over that time, we inspected over 100 furnaces in 27 countries. What we found in the process is that many of the industrys assumptions about furnace health are not accurate.
Because high risk furnaces have been the initial target of SmartMelter®, we found an unusually high 22% of the furnaces that we inspected had glass penetration into insulation. We also found that the industry is being quite a bit conservative in some areas. SmartMelter® enabled a majority of our customers to delay both overcoat timing and rebuilds because the industry plans such repairs conservatively, primarily based on glass pull.
During this time, we also debunked two popular myths:
Myth 1: Glass penetration into insulation may lead to a major leak within hours or days.
Glass penetration into insulation can actually last over a year or two before turning into a major leak. Weve had customers start with about 200 mm total insulation thickness left in the bottom and run the furnace for another 2 years with smart cooling and regular SmartMelter® monitoring.
Myth 2: A surface temperature of 500C is the most commonly used guidance for overcoat planning.
Actually, 500C does not necessarily indicate the furnace needs an overcoat in container and flat glass furnaces. On furnaces with poor cooling methods, 500C resulted in a thickness range of 60-100mm. Even on furnaces that have had very good cooling, 500C indicated a thickness range of 30-50mm. The majority of our customers are targeting 20-25mm when planning for overcoat, so this data effectively increases the campaign life of the furnace.
Our data is laying the foundation for smarter maintenance decisions. We are confident that we will contribute more valuable information as our work continues. I look forward to bringing you more new insights as we discover them.
07.02.2019, Paneratech
News material on the Site is copyright and belongs to the Company or to its third party news provider, and all rights are reserved. Any User who accesses such material may do so only for its own personal use, and the use of such material is at the sole risk of the User. Redistribution or other commercial exploitation of such news material is expressly prohibited. Where such news material is provided by a third party, each User agrees to observe and be bound by the specific terms of use applying to such news material. We do not represent or endorse the accuracy or reliability of any of the info contained in any news or external websites referred to in the news.
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.