Decorating Lehr

Requests only

We are looking for equipments and machinery for Glass container plant:

Main technical Details of Decorating Lehr 1.3

• Dimensions

1. Preferred Belt width (useful) : 3 200 mm( Or Antonini to decide)
2. Useful tunnel height : 400 mm
3. Length of controlled temperature section: 22 500 mm
4. Length of harvesting table : 5 250 mm
5. Preferred Total length : 29 250 mm (fixed due to space constraint
6. Height of belt from ground at entrance: 1000 mm
7. Height of belt from ground at exit : 1000 mm
8. Noise level at a distance of 1.5 metres: less than 76 dB
9. Type of heating : direct
10. Fuel: gas
11. Belt return : inside the lehr
12. Lehr mat material : Stainless steel
13. Paint used for Decorating Lehr : HMF (Heavy metal free) to be fired for 28/30 min at 6400 C
14. Bottle type A : 50cl Coke, Weight : 470 gm, Diameter : 67.8 mm, Speed : 120BPM
15. Bottle type B : 35cl Coke, Weight : 376 gm, Diameter : 65.2 mm, Speed : 125BPM
16. Preferred number of bottles per row : 26 bottle per row

• Power Supply

1. Electric energy 400V (3 phase + GND) ±5% 50 Hz
2. Control voltage : 220 V
3. Type of gas : Natural Gas
4. Delivery pressure : @1 5 bar
5. Operating pressure : @500 mbar

• Capacity : 80 Ton per Day
• Make : Antonini
• Remark : AIR CIRCULATION

FANS SHAFT AND LOAD BEARINGS SHOULD BE SEPARATE FROM DRIVE MOTOR