Leader in vacuum systems for IS machines and industrial vacuum coating. The UV50 is the largest air-cooled single stage machine world-wide. Rotary vane compressors from 3-10 bar up to 250kW and turbocompressors Samsung Techwin.

Full Products Range

To accommodate any customer need or application requirement, we offer different technologies in a wide capacity range.
Pneumofore sliding vane compressors lead the market in energy savings: less than 0,1 kW power consumption per each m3/h of delivered air. Some units, thanks to their design, also ensure important long-term cost reductions in regard to maintenance.
For projects requiring a faster ROI or smaller, short-term installations, we also provide more common solutions such as piston and screw compressors.

All products are delivered in compliance with CE norms (European Community). Most machines are available for any combination of voltage and frequency.

· Air compressors
Sliding vane, single-stage, oil lubricated, from 7,5 to 250 kW and from 65 to 2400 m3/h
Rotary screw, single-stage, oil lubricated from 4 to 75 kW and from 33 to 690 m3/h
Piston type, single and double stage, oil lubricated from 0,75 to 9 kW and from 7,2 to 144 m3/h
High pressure piston type, oil lubricated from 2,2 to 11 kW and from 15 to 35 bar
Diesel driven, portable, oil lubricated from 21 to 152 HP and from 120 to 1020 m3/h

· Oil free air compressors
Centrifugal, up to three stages, from 110 kW to 1000 kW and from 900 m3/h to 9400 m3/h, with pressure from 3 to 10 bar

· Rotary vacuum pumps
Sliding vane, single-stage, oil lubricated, from 3 to 2850 m3/h and 0,5 mbar residual pressure
Sliding vane, single-stage, oil free, from 3 to 40 m3/h and 120 mbar residual pressure
Side channel blowers, from 40 to 550 m3/h, depression from 60 to 250 mbar and compression from 65 to 320 mbar

· Accessories for compressed air
Fridge dryers, capacity from 30 to 8750 m3/h
Adsorption and high pressure dryers, on request
Filters, capacity from 20 to 38400 m3/h with residual oil content down to 0,003 mg/m3
Air receivers, tested according to CE regulation, volume from 0,5 to 10 m3

· Accessories for Vacuum
Filters, capacity up to 3000 m3/h
Dedicated receivers, volume from 2 to 8 m3.

· Service
Complete customer satisfaction regarding spare parts, assistance and troubleshooting is guaranteed through a dedicated division of Pneumofore with trained and experienced professionals.

· Plant Engineering
Pneumofore´s engineering team is available for consulting and customer support to respond to case-specific requirements.